Light weight - Switch-mode PSU - Solidly built - Protection - Limiter 


                                        


The G9 ASG series of professional power amplifiers are designed to give superb audio performance with all the features, control and sonic performance you might expect from G9. The ASG series amplifiers are all Class H topology and use Bi-polar devices on the output. The switch-mode PSU allows all versions to be 2U in height, while making sure they are both light-weight and capable of delivering stable power down to 2 Ohms.

The ASG series amplifiers have been designed and built to exacting standards and are a good match for the G9 system products, including the superb “G” series professional plywood enclosures and the DSM 26 Digital Speaker Management system. The ASG professional power amplifier series adds to a high quality and compatible audio system package, a well priced series with no compromise from G9.

Mechanical & Protection Features
Switch-mode PSU - ASG-600 = 207v to 253v.
Thermal protection circuitry.
Soft start circuitry.
NEUTRIK PowerCon power connector.
Three fans with front to back variable speed airflow.
Removable front inlet filters, washable for cleaning x 2.
Rear rack fixing points.


Front Panel
Precision 41 step input attenuators on Channel 1 & Channel 2.
Input level indication by LED ladder from 0dB to –30dB.
Amplifier Status - Green LED ON.
Protect warning - Red LED shows protection status.
Clip/Limiter - Yellow LED (more than 0.5% THD). Also indicates the input is compressed by the amplifier.
Bridge Mode status - Yellow LED indication.


Rear Panel
Mode switch: Stereo / Bridge / Parallel.
Limiter switch - On / Off
Sensitivity switch on each individual channel - 1.4v / 32dB / 26dB.
XLR input connector (female) x 2 with parallel XLR output connector (male) x 2.
Speakon loudspeaker connector x 2 Bridge output via Channel 1.
Neutrik PowerCon - Mains connection.



ASG Amplifier with “G” series loudspeakers
The ASG series amplifier are suitable for all “G” series cabinets. The  ASG-600 is most suitable for either G8 or G12. All ASG amplifiers give good power output at 8 Ohms and will operate down to 2 Ohms and are bridgeable at both 8 and 4 Ohms.

ASG series amplifier.pdf